This documentation is specific to Trisquel 12. It should apply to other releases as well, but if you think it needs an update feel free to contact support, or for that matter if you have any questions or need additional documentation.
For printing:
1. Make sure your computer is connected to the same network as the printer
2. Then go to Trisquel Menu in the lower left corner > System > Administration > Printers
3. Click the Add button
4. Click on Network Printer on the left side
5. Give the wizard a minute to locate the printers on the network; including the Canon 269
6. Select the Canon MF260; select the one that includes the IP address, example: 192.168.10.105
7. Click the Forward button
8. Click the Forward button again
9. Click the Apply button
10. Click the Print Test Page button
11. You should get a Trisquel test page; Your setup is complete
For scanning:
1. Make sure your computer is connected to the same network as the printer
2. Then go to Trisquel Menu in the lower left corner > Graphics > Document Scanner
3. Select eSCL Canon MF260 from the drop down
4. In the top left corner of the window click the Scan button; the document will appear if you have one in the flatbed of the scanner
5. Click the down arrow button to save the document as a file
6. Click the Save button
7. You can click the X button in the top right corner of the window to exit the scanning app